Fraxel is a recently emerging procedure that rejuvenates the skin of the face using a special apparatus.This procedure is implemented using a laser that moves based on fractional photorage.
This technology has a formal impact on the skin, which harms the texture.Therefore, the self -Health process is launched.All because of the fact that the cells are starting to produce collagen, elastin and hyaluronic acid.
A feature of technology
The main feature of technology is the concern of its impact and performance.It should be noted that the laser beam significantly increases the accuracy of exposure due to smaller rays.
Types of types of laser fraction
The field photorage is divided into 2 types:
- Ablative.The length of the wave is 2,940 Nm.This type of radiation is absorbed with water, so radiation affects all levels of skin.The master can adjust the depth of penetration by moving over a certain layer for the maximum effect.
- The non-ID.The wavelength is adjusted up to 1,320 nm with 1540 nm.This type of radiation affects deep skin structures, but does not affect the upper layers.Thus, the stimulation of elastin and collagen production occurs and the cell exchange is significantly improving.Therefore, the skin is toned, lethargy and sagging are eliminated.
When the non-bature exposure occurs, the restoration of the skin occurs faster.But it is possible to rob and redness.However, both types have high efficiency.
Laser fractional types
Each has several types of fraxel lasers with their own characteristics.
Fraxel
Is the most common device.The length of the wave is 1550 Nm, the depth of penetration can be adjusted from 0.4 to 1.4 mm to 1.The older pigment helps to eliminate peaks, acne, sunburn, acne marks and also struggles with skin photo cups.
Erby laser
This is a laser with 1440 Nm wavelength.The softest of all the submitted models is therefore used in subtle areas of the face and body.It is also expedient to use it for people with delicate and sensitive skin.
This model is allowed on even mammal glands and eyelids.And after the use of the recovery period is minimal.
Reporte Binary
The model combines 2 laser because more advanced, and there are different wavelengths:
- Erbiye - 1550 Nm;
- Tulium - 1 927 Nm.
This model is used to remove the post post of the post post, removing sore prints, deep and small wrinkles.
Again in pairs
The most aggressive of all the submitted models.Therefore, only the deep layers of the epidermis are treated.This device can remove deep wrinkles in the face and neck.He also fights wounds and scars.
Benefits or losses from the laser
Advanced technology allows you to equally affect the required areas of the skin.And there is no wound thanks to the rapidly accelerating zone (70 - 150 mn) and a small diameter.Update occurs as soon as possible and rarely more than one day.
The skin barrier function does not suffer from radiation, so the infection is completely excluded.The laser only does not affect the internal organs moving on the skin.
Therefore, we can say that the effect of the laser is more beneficial than harm.
Thing
Laser is very widely used.Expressions for procedures with Fraxel:
- Age - corrected pigmentations;
- acne;
- Leave photo colleagues;
- sunburn;
- acne prints;
- Small and deep wrinkles;
- wounds and wounds;
- skin pigmentation;
- Post -atethne;
- Stretch marks;
- to reduce the tone of the skin, the tone of the skin;
- Wide pores.
The device not only rejuvenates the skin, but also eliminates many aesthetic problems.
Counter-contrastingations
Nevertheless, there are a number of reflections in which the procedures with Fraxel were seriously prohibited:
- Cancer Neoplasms (both good and malignant);
- Hormonal disorders;
- a sharp form of infectious diseases;
- inflammation in the manipulation zone;
- Dermatological diseases;
- pathology of blood vessels and heart;
- epilepsy;
- Inclined to various bleeding;
- Autoimmune diseases;
- Pregnancy and breastfeeding;
- Problems with blood clotting.
In addition, do not perform the procedure during menstrual discharge, although it is more recommended than this majority.
How is the procedure going?
Before the start of the procedure, the master assesses the situation of the patient's skin, determines the methods of exposure and the depth of laser rays.It also determines how many sessions may need to overcome a special problem.
The procedure itself is carried out in several stages:
- Using a special composition, the skin is cleaned and raining.
- Lidocaine and Lidocaine ointment are applied to areas to be developed.Wait for 40 minutes.This will prevent pain.
- The ointment hit and the skin itself is lubricated.This allows you to easily slide on the device's skin surface.
- Then the work is done with the device itself.First of all, a face with a small nozzle (sequence: forehead, cheeks, jaw).The neck and / or body are treated after a larger nozzle.
- The eyelids are treated with a narrow nozzle.
- After the completion of the laser, the lubricant is removed from the skin.
General recommendations before the procedure
It is important to consult your doctor before the procedure and make sure that there are no reverse indicators for such exposure.It is recommended to start taking anti-miners medications to exclude inflammation in a few days.
Preliminary consultation with a master cosmetologist who will implement the procedure will not exceed.Are likely to make additional recommendations.
Results and consequences
The normal results of the procedure include:
- Itching and burning (unimportant);
- Redness of the skin (passes through 5-7 days);
- edema;
- dryness;
- anxiety;
- Small pain.
However, despite the delicate influence of Frakhel, rarely, complications are still possible.These include:
- Pigmentation followed after inflammation;
- Important edema;
- erosion;
- slash of acne;
- Increased skin sensitivity;
- subcutaneous bleeding;
- Significant reductions (more than 7 days) of the procedure.
Advantages of Laser Fraxel
These are the main advantages of such laser exposure:
- Probability of exposure to various areas of the skin (even in the mammal glands and on the territory of the eyelids).
- Opportunity to affect skin that affects these areas only to be developed by a laser.
- Ability to update the skin on the cell level by activating the internal resources of the body.
Expected result
After several Frakel sessions, the skin should be healthy, narrowed the pores, wrinkles and pigmentation are completely eliminated.In the case of wounds and wounds, aesthetic types are better (insignificant completely).The relief of the skin is aligned, elastic and toned.
Skin care after processing
After the procedure, the following need to "help" as much as possible to prevent complications and "help":
- Lie down with a raised head.This will help reduce swelling.
- It is advisable to overcome the use of alcohol and nicotine (or least reducing the amount).
- Avoid not exposure to UV radiation.Use the sunscreen for 3 months after the procedure, including protection from sunlight.
- Do not use scrubs and aggressive cosmetic products.
- In case of images, do not tear the shells and peeling.
How often can you do procedures
The term of the procedure itself is not more than 20 minutes.However, the next meeting can be held before 5 weeks.The course of treatment is selected individually for each patient and has an average of 4-6 sessions.
Laser effect has aggregate effects, so the result may last until 15 years.
Compare Fraxel therapy with other rejuvenating methods
Analog Fraxel is considered in terms of impact:
- The term.Although an analogue, it becomes more effective as an additional procedure for Fraxel.
- Nano-perforation.Although a more delicate procedure is not so effective, and it is less impact.
- Mezotherapy.Such an aggressive is not a procedure, moreover, the price is more convenient, but there is less effective effect.
- DOT.Combines the effects of radio waves and lasers.This procedure has more opposite instructions.
Fraxel analogue is also Fraxel.But personally has better for him, each patient must determine the head, because devices are similar to the method of exposure.Despite the expansion of fraxel functionality.
Convenient compounds
The biggest effect of the procedure can be achieved by combining others.For example, it is recommended to use plasmolifting or termemia at the same time with Fraxel.This will help you quickly access the desired result and maintain the effect for longer.